Normally Closed Valve

  1. Brief introduction
    Normally Closed Valve mostly work with hydraulic packer which set by differential pressure.
    After operation and would to pull out of packer, drop ball to increase pressure for opening circulating port, make sure to balance pressure above & below packer when pulling out of completion string tools, could start directing & reversing operation.
    Ⅱ type of normally closed valve could shoot ball valve to bottom, inject heavy crude oil by annulus, mix with down-hole back liquid and return to surface from string tool.

  1. Technical specification

    Type

    		 OD(mm) ID(mm) Length(mm) Open/shoot differential pressure (MPa) Thread connection
    Ⅰ
    Type    		 Ф101.6 Ф60.3 450 7~28 2 7/8’’EUE.B×P
    Ⅱ Type Ф99 Ф52 310 2 7/8’’EUE.B ×3 1/2’’EUE.P
  2. Structure diagraph
Normally Closed Valve Normally Closed Valve
Type Ⅰ Type Ⅱ

Enquire About This Product

Please send your request to sales@bottagroup.com OR please fill in the form below.

Image CAPTCHA
Enter the characters shown in the image.